• 5 times stronger than all other rafter brackets - Minimum
• Made with high strength steel
• Only 2.5mm of deflection at the tile height when loaded to 1200kg
• LOWER COST than other Rafter Bracket Assemblies 
• Special Design Large Oversized Washers Included to spread the load over a larger area over a larger area
• 2 through holes allow for fitting of Eye Bolts in 4 directions
• Shade sail can be connected at any angle

INCLUDED ITEMS	CODE	QUANTITY
Rafter Bracket 30mm	RB-30	1
Rafter Bracket Backing Plates	RB-30BP	4
Eye Bolt M10*60mm Prorig	S3191-10060PR	1
Hex Nut M10 Stainless	SN-10	1
Hex Bolt M10 x 75mm (with nut) Zinc	HB-10075ZN	8
M10 Washer, Zinc Plating	ZW-10	8

 

Bracket shown with 1250kgf load applied at right angle to the plate. Rafter Bracket returns to original shape when load is removed.  No permanent deformation whatsoever. 

 

 

 

FOR MORE INFORMATION

CHECK THE LINKS BELOW

 

 

 

⬅️DOWNLOAD THE INFORMATION            BROCHURE HERE