New Rafter Bracket RB-30

Written by Miami Stainless | 15-Jun-2020 05:41:56

The New Rafter Bracket RB-30A

5 times stronger than all other rafter brackets - Minimum
Made with high strength steel
Only 2.5mm of deflection at the tile height when loaded to 1200kg
LOWER COST than other Rafter Bracket Assemblies
Special Design Large Oversized Washers Included to spread the load over a larger area over a larger area
2 through holes allow for fitting of Eye Bolts in 4 directions
Shade sail can be connected at any angle

RAFTER BRACKET ASSEMBLY KIT RB-30A INCLUDES:

INCLUDED ITEMS	CODE	QUANTITY
Rafter Bracket 30mm	RB-30	1
Rafter Bracket Backing Plates	RB-30BP	4
Eye Bolt M10*60mm Prorig	S3191-10060PR	1
Hex Nut M10 Stainless	SN-10	1
Hex Bolt M10 x 75mm (with nut) Zinc	HB-10075ZN	8
M10 Washer, Zinc Plating	ZW-10	8

Bracket shown with 1250kgf load applied at right angle to the plate. Rafter Bracket returns to original shape when load is removed. No permanent deformation whatsoever.

FOR MORE INFORMATION

CHECK THE LINKS BELOW

⬅️DOWNLOAD THE INFORMATION BROCHURE HERE

View full post