What are the regulations for wire balustrades?

For projects up to 4 metres off the ground you will require a minimum of 80mm spacings between the wires and posts at intervals of 1200mm. For projec

ts above 4 metres you should consult and engineer for advise.  If using our online balustrade builder, it will calculate the correct spacings to meet NCC Balustrade Regulations.  Click here to watch a video on how the balustrade quote calculator works.

Should I get the DIY system or a Pre-Swaged System?

When choosing a system you need to consider your handyman skills and time frame to complete the project. For the DIY systems you will require extra tools however if you are short on time and can not wait a couple of days for the factory swage, this might be the best option for you. If you have limited skills and tools a pre-swage system might be a more suitable option. Our friendly team can help you decide on the best system for your needs.

What system should use?

The wire balustrade systems vary greatly and choosing a system can be largely dependant on:

* Timber or steel posts

* Height of the project

* Stair or horizontal design

* Desired aesthetics

If you are unsure of which system to use contact our helpful sales team who can work with you to decide on the best system for you.

What are the lead times for swaged systems?

Generally the lead time for factory swage systems is up to 3 days. During the Spring & Summer months demand can be high and lead time can sometimes increase. For more precise lead times call our sales team.

What tools will I need?

The tools you need for balustrade wire will depend on the type of wire system you choose to use. Our sales team can advise you on what is required. Most of the tools you require for balustrade installation can be purchased on our website, or if you are based on the Gold Coast you can hire the equipment for a small fee.